Martek Motors Inc.

I have a red head spindle that have had repaired twice at a different shop. Both times I had to start re adjusting the nose cone height within a cpl of months. Then about almost to the end of warranty it crashed and had to send it back in. It should have been warranty work but they claimed was not, it was due to a mysterious black wire or operator error. Tried to redo the problem but could not get it to repeat.Got the rebuilt spindle back and again, within 6 to 8 weeks had to start adjusting the nose cone height again. Also seemed to have ran much hotter both times than before sending in originally. Was also not catching the tools as it should.After the 2nd time of sending to this shop decided to try Martek Motors. Am still kicking myself for not sending it there the first time. We found out that the bearings being used were smaller than should have been, the wrong size springs were used, and had scoring and other issues with the shaft that should have been corrected at the previous shop. It was out of specs on angle and a cpl other issues.I have had the spindle back since Nov of 2019 with no further issues. It runs cooler now, I can place my hand on the lower spindle section and keep it there, even after running all day in central florida weather. Before I could not keep it on the spindle for very long.I check the nose cone height at least once a week, and it has not moved since receipt. I am very pleased with the rebuild and how it has performed since then.I would definitely recommend Martek for a rebuild.

I highly recommend Martek. We had a spindle failure causing our production line to shut down. Mark made this rebuild process extremely easy along with a quick turnaround time. Thanks

Our spindle went down and Martek came highly recommended by our technician. The service, communication, speed, and results were fantastic. Many thanks from Oregon -

True professionals at what this company does. Thorough, accurate, timely and honest. Our company has had three dealings with Martek and Mark the owner, and every experience has been top notch and professional with and emphasis on timely repairs of our CNC Router motors. When a machine goes down, lost business and production are effected. Having Martek servicing our equipment makes down time minimal and repairs are executed with our company’s needs always meet in a timely manner.

My Eurospindle redhead went down and Martek Motors did a complete rebuild. Absolutely amazing work and quick turnaround time. Stayed with until we got it hooked back up and running great now.